Jiangmen Pengjiang Weisheng Machinery Co., Ltd.
13902889706
956182975@qq.com

company's product

Rotary double-head double-station grinding machine

Rotary double-head double-station grinding machine

WH-MC2X rotating double-station grinding machine, which is a circular or conical product for round and cone products in small and medium batches, such as lids, pots, cups and other products. It has the characteristics of reliable performance, high safety and high efficiency. Machine specifications and parameters Machine dimensions: 1800 × 1450 × 1580mm Machine weight: 1500kg Motor power: main motor 8KW sub motor: 400W servo motor 3KW Applicable consumables: Thousand impeller, nylon wheel, hemp wheel, cloth wheel

Details

WH-MC2X rotating double-station grinding machine, which is a circular or conical product for round and cone products in small and medium batches, such as lids, pots, cups and other products. It has the characteristics of reliable performance, high safety and high efficiency.

Machine specifications and parameters

  1. Machine tool dimensions: 1800 × 1450 × 1580mm

  2. Machine weight: 1500kg

  3. Motor power: main motor 8KW sub motor: 400W servo motor 3KW

  4. Applicable consumables: Thousand impeller, nylon wheel, hemp wheel, cloth wheel

  5. Consumables specifications: Thousand impeller, nylon wheel, hemp wheel, cloth wheel: φ350mm or less

    Cloth wheel aperture: φ32mm

    The main structure

    1: Body part: used to support the polishing wheel set, the protective cover and the main motor installation.

    2: Wheel part: the motor is driven to polish the axle, the helix or cloth wheel is installed at the shaft end, and the thousand impeller and nylon wheel can also be installed; the servo motor drives the column to move back and forth, which can be used for the position adjustment of the polishing wheel and the wear of the polishing wheel. Automatic compensation; the grinding head can be adjusted forward according to the workpiece cylinder or cone.

    3: Workbench part: The double-station is independently controlled. Under the action of the rotary cylinder, the workbench turns the workpiece to the polishing wheel for polishing. After the workpiece is polished, the cylinder rotates and sends it out.

    4: Electronic control part: use the PLC control system to control the start and stop of the whole machine through buttons (with automatic and manual functions), the polishing time can be adjusted on the display in the electric box.

    5: Fixture part: The surface of the fixture can be affixed with textured paper. The workpiece is sucked by controlling the compressed air. The workpiece is released by controlling the compressed air.

    Different from the working process of the disc machine : when the display shows automatic, put the workpiece on the fixture, press the foot switch or switch, the workpiece is sucked and rotated, and the rotary cylinder rotates the workpiece 180° to the front of the polishing wheel, two polishing The wheel components are driven by the servo motor to drive the column polishing wheel forward to the workpiece. After the polishing, the components of the two polishing wheels are driven by the servo motor to move the column polishing wheel away from the workpiece. The table is under the action of the rotary cylinder. The polished workpiece is sent 180°, the workpiece stops rotating, and the workpiece is taken out; while the workpiece is sent while the other workpiece is pushed toward the polishing wheel for polishing.

[[TD-Recommended Products]]