WH—XYP4 head small disc polishing machine
The main structure of the small disc machine :
(a). Small disc conveyor
The conveyor consists of a base part, a sealing system, a turntable mechanism (splitter, splitter power unit), a workpiece shaft, and a workpiece shaft power unit.
1 base part - used to support the disc, sealing plate, workpiece shaft and transmission components;
2 sealing system - used to cover the outer frame of the machine;
3 Turntable mechanism——Under the motor drive, the splitter rotates around the center of the turntable according to 24 equal parts, and drives the workpiece shaft to revolve, so that the workpiece enters the polishing area;
4 workpiece shaft - support workpiece fixture;
5 Workpiece shaft power unit – drives the workpiece shaft to rotate, making the workpiece polished more evenly.
(2). Polishing column structure
The column consists of a base part, a column part and a polishing wheel set.
1 base part - mainly used to support the column, polishing wheel set and other components, in this part is equipped with a sliding seat for front and rear adjustment, also used for the compensation of the cloth wheel in the horizontal direction;
2 The column part—supporting the polishing wheel set, etc., can be adjusted vertically by the sliding seat mounted thereon;
3 Polishing wheel set——The main motor drives the polishing wheel shaft to polish the workpiece. Through the circular arc groove, the cloth wheel can be adjusted at a certain angle to meet the needs of different shapes of workpieces.
(1). Small disc conveyor large external dimensions (length × width × height mm):
1270 × 950 × 750mm;
Main motor power: 0.7KW 380V
Secondary motor power: 0.4KW
Total power: 1.1KW
Number of workpiece axes: 24
(2). (Single seat) column polishing machine dimensions (length × width × height mm):
680×750×1200mm
Main motor power: 2.2KW 4 pole 380V
Total power: 8.8KW
Spindle speed: 2200 rpm
(3). Applicable consumables specifications: φ12′′ (304.8mm), central shaft hole: φ25mm