The main structure
1: Body part: used to support the column, fixture and main motor installation.
2: Wheel part: The grinding wheel shaft is driven by the motor, the nylon wheel or the belt is installed at the shaft end, and the thousand impeller can also be installed.
3: Adjustment part: The middle nut of the cross arm of the polishing machine is used to adjust the angle of the polishing wheel axle and swing the angle according to the inclination of the workpiece.
4: Hydraulic part: The middle cylinder of the column is used to adjust the upper and lower strokes of the polishing wheel shaft.
5: Clamping part: According to the inside and outside of the throwing workpiece, the shape and size, the clamping plate and the moving pallet are clamped.
