WH-PC02-K sink mold side grinding machine, and flat polishing machine , this machine is the inner side polishing or sanding and drawing equipment of small and medium batch sink products, such as stainless steel sink, square box and so on. It has the characteristics of reliable performance, high safety, high efficiency, uniform drawing texture, etc.
Machine specifications and parameters
Machine tool dimensions: 2000 × 880 × 2180mm
Machine weight: 700kg
Motor power: main motor 4KW sub motor: 1.1KW
Applicable consumables: Thousand impeller, nylon wheel, abrasive belt
Consumables specifications: Abrasive belt: 50 × 350 thousand impeller, nylon wheel: φ50-φ100mm
Throwing R angle Applicable range: Large: R50×200mm Small: R10×200mm
The main structure
1: Body part: used to support the column, fixture and main motor installation.
2: Wheel part: The grinding wheel shaft is driven by the motor, the nylon wheel or the belt is installed at the shaft end, and the thousand impeller can also be installed.
3: Adjustment part: The intermediate nut of the cross arm is used to adjust the angle of the polishing wheel axle and swing the angle according to the inclination of the workpiece.
4: Hydraulic part: The middle cylinder of the column is used to adjust the upper and lower strokes of the polishing wheel shaft.
5: Mould part: Make the mold track according to the shape of the workpiece.
