WH-MN2 double station grinding machine inside machine outer polishing machine automatic operation steps: after the equipment is reset, put the workpiece; press the foot switch; confirm the workpiece is tight (if the workpiece is not properly clamped, press the panel "left arrow" Loosen the left workpiece, press the “right arrow” on the panel to release the right workpiece; then press the foot switch; after the grinding head is lowered, the grinding head starts, and the workpiece is polished near the grinding head under the action of the cylinder; When the head is to move upward, the grinding head moves upward under the action of the cylinder; after the machining is finished, the workpiece leaves the grinding head under the action of the cylinder, and then the foot switch is pressed to take out the workpiece. One processing
External polishing machine automatic operation steps: After the equipment is reset, put the workpiece on; press the foot switch; confirm the workpiece is tight (if the workpiece is not properly clamped, press the left arrow of the panel to release the left workpiece, press the panel) The right arrow "releases the right workpiece"; then presses the foot switch; after the grinding head is lowered, the grinding head is started, and the workpiece is polished near the grinding head under the action of the cylinder; if the workpiece requires the grinding head to move upward, the grinding head Move up under the action of the cylinder; after the machining is finished, the workpiece leaves the grinding head under the action of the cylinder, and then the foot switch is pressed to take out the workpiece. A machining process ends.
