WH—B02C double head outer round polishing machine
The workpiece is taken as the research object for force analysis. When the angle between the axis of the guide wheel and the horizontal plane is adjusted to α, the radial direction of the guide wheel and the radial direction of the polishing wheel are also α. It can be seen that when the speed of the guide wheel is constant When the angle α between the axis of the guide wheel and the horizontal plane is continuously increased by zero, the value of sinα is continuously increased, and the speed at which the workpiece moves horizontally with the support frame also increases. When working, the center of the workpiece must be higher than the center line of the guide wheel and the polishing wheel, so that the contact point between the workpiece and the polishing wheel and the guide wheel of the polishing machine is not on the same diameter of the workpiece, so that some convex surfaces on the workpiece are It can be rounded one by one in multiple rotations to avoid grinding out the rounded workpiece.