Jiangmen Pengjiang Weisheng Machinery Co., Ltd.
13902889706
956182975@qq.com
Inner and outer round polishing machine manufacturers

Inner and outer round polishing machine manufacturers

Working principle of WH-PPW300 in-plane hole polishing machine: The plane polishing machine automatically clamps the workpiece (suction) and rotates the workpiece. The table is automatically fed to the lower end of the polishing head. After polishing for a few seconds or several times, the inner hole is thrown up and down. Automatically exit after polishing for a few seconds or several times, stop the workpiece rotation, and automatically release the workpiece (blowing). PPW300 structure 1: fuselage part: used to support the polishing wheel set, work table and electric box. 2: Wheel part: The grinding wheel shaft is driven by the motor, the hemp wheel or cloth wheel is installed at the shaft end, and the thousand impeller and nylon wheel can also be installed. 3

Details

WH-PPW300 plane hole polishing machine

Working principle: The plane polishing machine automatically clamps the workpiece (suction) and then rotates the workpiece. The table is automatically fed to the lower end of the polishing head. After polishing for a few seconds or several times, the inner hole is thrown up and down. After polishing for a few seconds or several times, it will automatically exit. Stop the workpiece rotation and automatically release the workpiece (blowing).

Structure of PPW300

1: Body part: used to support the polishing wheel set, work table and electric box.

2: Wheel part: The grinding wheel shaft is driven by the motor, the hemp wheel or cloth wheel is installed at the shaft end, and the thousand impeller and nylon wheel can also be installed.

3: Adjustment section: Adjust the angle when polishing straight or cone.

4: Workbench part: Under the action of servo motor and ball screw, the workpiece is pushed into the polishing wheel for polishing. After the workpiece is polished, it is sent out, and the auxiliary motor drives the workpiece to rotate.

5: Electronic control part: PLC control, control the start and stop of the whole machine through button or foot switch, polishing time and polishing track can be set and adjusted on the touch screen outside the electric box.

6: Clamp section: Clamp or loosen the workpiece. Squeeze or loosen the workpiece by vacuum suction.

The main technical parameters:
Dimensions: 1260 × 900 × 1800mm

Voltage: 380V
Power: 4.7KW (1 3KW, 2 0.75KW, 1 0.2KW)

Electric box: PLC control system for consumables, specifications: hemp wheel, nylon wheel, cloth wheel (outer diameter φ300mm or less: φ25mm)
Scope of application: It is suitable for the inner surface polishing or sanding equipment of shallow circular and conical products of medium and small batches of φ100-φ300×130mm or less, such as discs and pots. It has the characteristics of reliable performance, high safety and high efficiency.

[[TD-Recommended Products]]