Polishing machine manufacturer: Maintenance method for important parts of external polishing machine
The outer round polishing machine is mainly used for hardware manufacturing, vehicle parts, steel and wood furniture, exterior machinery, standard parts and before and after plating. It is a good choice for round tube, round stick and slender shaft polishing. According to the shape of the workpiece, it can be divided into plane polishing machine, ball polishing machine, square tube polishing machine and strip polishing machine. According to the polishing process, it can be divided into a single set of outer round polishing machine and a plurality of sets of vertical outer round polishing machines and multiple sets of horizontal polishing machines. Today, Jiangmen City Pengjiang District Weisheng Machinery Xiaobian to tell you about the maintenance of important parts of the outer polishing machine.
First, the important part of the outer polishing machine: the bin
When the outer round polishing machine is in use, the blockage will occur because the bin is too full, which affects the operation of the machine. Therefore, the bin needs to be cleaned more than once a week;
Second, the outer round polishing machine needs long-term maintenance: the oil in the reducer wheel box
The oil in the reducer wheel box is generally added once every two years;
Third, the outer polishing machine maintenance is essential: lubricant
Regularly increasing the lubricant can make the machine work at a higher speed. In general, the bearing needs to be re-added to the lubricant for about three months;
Fourth, the outer round polishing machine is not used for a long time: pay attention to the environment
Do not place in a cold and humid environment, do not directly contact with water, and put it in a dry environment;
The above is the maintenance method for the important parts of the outer polishing machine, and I hope to provide you with some assistance.
Five, the outer polishing machine needs daily attention: refueling
It is not advisable to fill up during the refueling process, just like the car refueling is not suitable for filling up. Overfilling will spill over other parts, which may cause problems;
