WH-S15L-1 plane sander
The main technical parameters:
1: Dimensions: 2300 × 1050 × 1500mm
2: Weight: 600kg
3: Workbench size: 1500×600mm Processing range: 1000×500mm or less
4: Motor power: 1.6KW with inverter
5: Spindle speed: 1440r/min
6: Consumables specifications: abrasive belt (or nylon belt): 780 × 50mm (length × width)
Nylon wheel, polishing wheel: φ200-250×φ25×50
The main structure:
1: Body part: used to support the wheel set, work table, protective cover and main motor installation.
2: Wheel part: The sanding machine drives the rubber wheel by the motor to make the belt move in a circular motion, the driven wheel supports the belt, and the tensioning wheel
Used for tensioning and replacement of abrasive belts.
3: Shield part: Prevent the belt from breaking or flying out and hurting people.
4: Workbench part: Install the workpiece to sand the belt. According to the size of the workpiece, move the positioning rod on the workbench to make the sink fixed. According to the height of the workpiece, press the switch to automatically adjust the lift motor to the appropriate one. the height of.
5: Pressure roller part: It is mainly used to press the abrasive belt, nylon belt, or wire drawing wheel to the workpiece, so that the abrasive belt, the nylon belt, or the drawing wheel can work in contact with the surface of the workpiece.
