WH-S15L plane sander
The main technical parameters:
1: Dimensions: 2450 × 1000 × 1850mm
2: Weight: 650kg
3: Workbench size: 1500 × 600mm (sink processing range: 1000 × 440mm or less)
4: Motor power: 1.5KW with inverter
5: Spindle speed: 1440r/min
6: Consumables specifications: abrasive belt (or nylon belt): 5000 × 50mm (length × width)
The main structure:
1: Body part: used to support the wheel set, work table, protective cover and main motor installation.
2: Wheel part: The rubber wheel is driven by the motor to make the belt move in a circular motion, the driven wheel supports the belt, and the tensioning wheel
Used for tensioning and replacement of abrasive belts.
3: Shield part: Prevent the belt from breaking or flying out and hurting people.
4: Workbench part: Install the workpiece to sand the belt. According to the size of the workpiece, move the positioning rod on the workbench to make the sink fixed. According to the height of the workpiece, press the switch to automatically adjust the lift motor to the appropriate one. the height of.
5: Pressure roller part: It is mainly used to press the abrasive belt to the workpiece to make the abrasive belt work in contact with the surface of the workpiece.
Our company specializes in the production of flat polishing machines, curved sanding machines, pressure vessel polishing machines and other equipment.
