WH-S15 plane sander
The main technical parameters:
1: Dimensions: 2450 × 1360 × 1600mm
2: Weight: 500kg
3: Workbench size: 1500 × 600mm
4: Motor power: 2.2KW 50HZ 380V
5: Spindle speed: 1420r/min
6: Consumables specifications: abrasive belt 4700 × 150mm (length × width)
The main structure:
1: Body part: used to support the wheel set, work table, protective cover and main motor installation.
2: Wheel part: The aluminum wheel is driven by the motor to make the belt move in a circular motion, the driven wheel supports the belt, and the tensioning wheel
Used for tensioning and replacement of abrasive belts.
3: Shield part: Prevent the belt from breaking or flying out and hurting people.
4: Workbench section: Install the workpiece so that the sanding belt sands it. According to the height of the workpiece, shake the handwheel to adjust the workbench to the appropriate height.
5: Hand-held platen: It is mainly used to press the belt to the workpiece to make the belt and the surface of the workpiece even.
6. This sanding machine is suitable for surface treatment of various plates such as fixed thickness sanding and fine sanding.
7. The pressure material conveying adopts the combination structure of the pressure shoe pressure roller, and is equipped with a dial gauge to make precise adjustment, completely solving the phenomenon of the leading end of the workpiece wing and short material processing.
