Polishing process and skill of round tube outer polishing machine
Nowadays, in the process of machining and manufacturing, in order to meet the production requirements, the brightness of the workpiece is increased, and in order to increase the aesthetics of the product, polishing technology is needed. There are many kinds of polishing processes, and the simple and effective one is mechanical polishing. At present, the round tube outer polishing machine can be selected from a single group (ie a group of grinding heads) to a plurality of polishing machines. The requirements for the finish are not high or only for simple descaling, a single set of polishing machine can be used; The finish is required to be high, and it is necessary to select several sets of polishing machines depending on the polishing material.
In the various industrial productions nowadays, various mechanical devices play a large role. The intelligent round tube polishing machine has the following advantages: the round tube outer round polishing machine is a device specially used for polishing round tubes. The motor drives the polishing wheel to rotate at a high speed, and the surface of the tube is polished at a high speed to improve the surface finish of the tube. For polishing steel tubes, shafts, standard parts polishing process, aluminum tubes, tubes, etc., it is convenient to replace the polishing wheel. It can use various types of polishing wheels such as thousand-page wheels, grinding wheels and cloth wheels, and can also be replaced according to actual needs. Corresponding polishing wheel.
For the polishing machine, the pass-through polishing machine is a relatively common one. Here, it should be emphasized that no matter which kind of polishing machine, before each use, it is necessary to make corresponding adjustment work, so as to better guarantee the quality of production. Here, we introduce the adjustment method of the pass-through polishing machine. The manufacturer of the round tube polishing machine introduces us. When we use the pass-through polishing machine to polish the workpiece, the operator must first understand the polishing rate to be used. The great advantage of this is that the wear layer of the polished part can be quickly eliminated, and the pseudo-tissue disappears completely. In order to achieve the result of this polishing, it is necessary to ensure that the abrasive is thicker, and after adjusting the use function, the polishing rate can be further improved.
In the process of polishing the round tube outer polishing machine, if you do not want the fake tissue to appear, the polishing material used must be meticulous. The use of such a polishing material reduces the degree of damage to the polishing material, and such a polishing method also improves the polishing efficiency. In order to ensure the polishing rate, a good method is to divide the polishing into two stages, that is to say, the rough polishing treatment and the fine polishing treatment.
