How to effectively improve the polishing work of the outer round polishing machine:
As a commonly used round tube polishing equipment, the outer circular polishing machine has been welcomed by the majority of users due to its simple and reasonable structure design and good polishing effect. However, in the process of use, there are always some reasons for affecting the working efficiency of the outer circular polishing machine. Below we will study the factors affecting the production of the outer circular polishing machine and find out the corresponding solutions.
The outer round polishing machine can be polished with iron pipe, stainless steel pipe, aluminum pipe and other materials. The harder the material is, the higher the brightness will be. If the length of the round tube is more than double the length of the polishing machine body, then the guide wheel frame needs to be added. Otherwise, only the several guide wheels carried by the machine itself will increase the resistance of the motor and easily make the motor hot.
The polishing wheel used for polishing should also select the appropriate polishing wheel according to different materials, that is, improve the polishing efficiency without causing waste on the polishing wheel. The commonly used polishing wheel has gauze thousand wheel, hemp wheel, nylon wheel, etc. .
The polishing depth should just throw away the impurities or bumps on the surface. It is too shallow to polish without length. If the polishing is too deep, it will cause waste and accelerate the wear of the polishing wheel.
The round tube polishing machine has high working efficiency, good surface roughness of the workpiece and stable performance. The machine guide wheel speed variable frequency control (optional),
Therefore, no matter the diameter and length of the workpiece, the processing efficiency can be obtained.
使用 polishing machine use and maintenance
1 Place the workpiece in the rail first.
2 Start the guide wheel motor and move the grinding head onto the workpiece if the forward speed is appropriate.
3 Align the center of the workpiece with the center of the thousand-page wheel.
4 When the rough throwing, the rotation speed of the guide roller can be lowered a little, and the rotation speed of the guide roller is appropriately high when the polishing is performed.
5 Lock the track and tilt the track at an angle (the larger the tilt angle, the higher the workpiece advances).
6 If the thread shape indicates a faster advancement speed, the inclination angle of the rail may be appropriately made smaller.
7 Always check for oil shortages in the gear unit.
8 Always check for murmurs or slight movements in the grinding head.
